Advantages
- It is possible to avoid or minimize cargo spillage due to misalignment and sway of loading.
- Since there is no spillage, the burden of cleaning work is reduced.
- It can prevent belt lugs from hitting the conveyor frame and being damaged, or from causing fires due to frictional heat.
| Adjustable detection angle  | The standard detection angle is 20° for alarm and 35° for stop. However, the installation position varies depending on the site. It is possible to change the detection angle of the pulley according to the site. |
Abundant lineup | “Weather proof type”, “Dust Ignition -proof type”, and “Flame proof type” can be selected depending on the usage environment. |
| Only worn pulleys can be replaced  | Pulleys are consumables because they come into contact with the belt and wear out. Reasonably priced because only the pulley can be replaced without changing the main body. |
| *For details, see the catalog and instruction manual. | |
| When the belt pushes the pulleys due to misalignment or slanting and tilts, a contact signal is sent to detect the misalignment or slanting of the conveyor. |  |
| 1.Determine mounting position  | Install in place where misalignment occurs. Decide on installation location that avoids falling ore from the conveyor or a location subject to large vibrations or shocks. |
2. Mounting | Provide a mounting base for Belt Sway Switch. Install Belt Sway Switch so that it is perpendicular to the belt. It is recommended to install cover in case of falling mines. |
3. Wiring | The contact signal is a dry contact. Avoid direct input to motors and sequencers, and use magnet conductors or relays. |
4. Adjustment | No adjustment is required as it has been adjusted at the factory. However, it is possible to adjust the detection angle in the field if necessary. |
| *For details, please refer to the instruction manual. | |
Periodic inspection is recommended as it is a safety switch.
- If there is a lot of dust on the pulley, it may cause malfunction, so clean it.
- If the portion of the touch pulley that comes into contact with the belt is severely worn, replace it.
- Confirm that the microswitch operates when the touch pulley is tilted.
Specifications
Dimensions(mm)
Mounting
Operation description
