HD-Stax Low Profile Option
A reduced height for closer vertical spacing allows more buckets per foot of elevator belt. When upgrading to HD-Stax Low Profile buckets, horsepower requirements must be evaluated due to increased capacity.
Other Considerations
- DRILLING: Elevator buckets are manufactured without a drill pattern. Special drilling or punching can be accommodated upon customer request.
- VENTING: Available as needed. See venting options in our catalog.
- DIGGER BUCKETS: Use slightly larger metal digger elevator buckets to help loosen material in the elevator boot section that has set up or hardened, thereby reducing abrasion on the plastic buckets. Call for details on Metal Digger elevator bucket options.
- SPACING: See elevator bucket spacing details in the size chart (depending on materials and speeds, smaller and larger spacing may be used).
- INSTALLATION: Use a #1 standard elevator bolt or Sabre-Tooth elevator bolt for installation. Designed to be used with fender or flat and lock washers and hex or locking nuts. If buckets are being installed on chain, use hex head bolts, nuts and washers.
- FDA: Both the urethane and polyethylene are designed to FDA specifications for direct contact with food products.
HD-Stax Size Chart
| BUCKET SIZE | PUNCHING | WEIGHT, LBS. | CAPACITY, CU. IN. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bucket Size | Length | Projection | Depth | Back Wall Thickness |
Centers | # of Holes |
Bolt Size |
Top Down |
HDPE | Water Level |
Usable 5 Deg. |
Std Spacing |
|||
| in. | mm | in. | mm | in. | mm | ||||||||||
| 4 x 3 | 4-1/4 | 108 | 3-5/8 | 92 | 2-7/8 | 73 | 0.25 | 2-1/4 | 2 | 1/4 | 7/8 | 0.22 | 16 | 18 | 4 |
| 5 x 4 | 5-5/8 | 143 | 4-5/8 | 118 | 4 | 102 | 0.32 | 3-3/16 | 2 | 1/4 | 1-1/8 | 0.47 | 38 | 42 | 5 |
| 6 x 4 | 6-5/8 | 168 | 4-5/8 | 118 | 4 | 102 | 0.32 | 4-3/8 | 2 | 1/4 | 1-1/8 | 0.55 | 46 | 51 | 5 |
| 7 x 4 | 7-5/8 | 194 | 4-5/8 | 118 | 4 | 102 | 0.32 | 2-5/8 | 3 | 1/4 | 1-1/8 | 0.61 | 52 | 57 | 5 |
| 6 x 5 | 6-3/4 | 172 | 5-3/4 | 146 | 5 | 127 | 0.35 | 4-3/8 | 2 | 1/4 | 1-5/8 | 0.81 | 72 | 79 | 6 |
| 7 x 5 | 7-3/4 | 197 | 5-3/4 | 146 | 5 | 127 | 0.35 | 2-5/8 | 3 | 1/4 | 1-5/8 | 0.92 | 85 | 94 | 6 |
| 8 x 5 | 8-3/4 | 222 | 5-3/4 | 146 | 5 | 127 | 0.35 | 3-1/16 | 3 | 1/4 | 1-5/8 | 1.00 | 103 | 113 | 6 |
| 9 x 5 | 9-3/4 | 248 | 5-3/4 | 146 | 5 | 127 | 0.35 | 3-1/2 | 3 | 1/4 | 1-5/8 | 1.10 | 110 | 121 | 6 |
| 8 x 6 | 8-11/16 | 221 | 6-7/8 | 175 | 6-1/8 | 156 | 0.36 | 3-1/16 | 3 | 1/4 | 1-5/8 | 1.39 | 140 | 154 | 7 |
| 9 x 6 | 9-11/16 | 246 | 6-7/8 | 175 | 6-1/8 | 156 | 0.36 | 3-1/2 | 3 | 1/4 | 1-5/8 | 1.51 | 158 | 174 | 7 |
| 10 x 6 | 10-11/16 | 271 | 6-7/8 | 175 | 6-1/8 | 156 | 0.36 | 4 | 3 | 1/4 | 1-5/8 | 1.63 | 176 | 194 | 7 |
| 11 x 6 | 11-11/16 | 297 | 6-7/8 | 175 | 6-1/8 | 156 | 0.36 | 3 | 4 | 1/4 | 1-5/8 | 1.75 | 194 | 213 | 7 |
| 12 x 6 | 12-11/16 | 322 | 6-7/8 | 175 | 6-1/8 | 156 | 0.36 | 3-3/8 | 4 | 1/4 | 1-5/8 | 1.88 | 212 | 233 | 7 |
| 13 x 6 | 13-11/16 | 348 | 6-7/8 | 175 | 6-1/8 | 156 | 0.36 | 3-5/8 | 4 | 1/4 | 1-5/8 | 1.99 | 230 | 253 | 7 |
| 10 x 7 | 10-15/16 | 278 | 7-15/16 | 202 | 7-1/8 | 181 | 0.38 | 4 | 3 | 5/16 | 1-7/8 | 2.30 | 246 | 271 | 8 |
| 11 x 7 | 11-15/16 | 303 | 7-15/16 | 202 | 7-1/8 | 181 | 0.38 | 3 | 4 | 5/16 | 1-7/8 | 2.51 | 272 | 299 | 8 |
| 12 x 7 | 12-15/16 | 329 | 7-15/16 | 202 | 7-1/8 | 181 | 0.38 | 3-3/8 | 4 | 5/16 | 1-7/8 | 2.68 | 296 | 326 | 8 |
| 13 x 7 | 13-15/16 | 354 | 7-15/16 | 202 | 7-1/8 | 181 | 0.38 | 3-5/8 | 4 | 5/16 | 1-7/8 | 2.83 | 320 | 352 | 8 |
| 14 x 7 | 14-15/16 | 379 | 7-15/16 | 202 | 7-1/8 | 181 | 0.38 | 3 | 5 | 5/16 | 1-7/8 | 2.98 | 345 | 380 | 8 |
| 16 x 7 | 16-15/16 | 430 | 7-15/16 | 202 | 7-1/8 | 181 | 0.38 | 3-1/2 | 5 | 5/16 | 1-7/8 | 3.34 | 400 | 440 | 8 |
| 12 x 8 | 13-1/8 | 333 | 8-15/16 | 227 | 8-1/8 | 206 | 0.40 | 3-3/8 | 4 | 5/16 | 2 | 3.69 | 395 | 435 | 9 |
| 14 x 8 | 15-1/8 | 384 | 8-15/16 | 227 | 8-1/8 | 206 | 0.40 | 3 | 5 | 5/16 | 2 | 4.14 | 470 | 517 | 9 |
| 16 x 8 | 16-1/8 | 435 | 8-15/16 | 227 | 8-1/8 | 206 | 0.40 | 3-1/2 | 5 | 5/16 | 2 | 4.58 | 550 | 605 | 9 |
| 18 x 8 | 19-1/8 | 486 | 8-15/16 | 227 | 8-1/8 | 206 | 0.40 | 3-1/8 | 6 | 5/16 | 2 | 5.04 | 615 | 677 | 9 |
HD-Stax (Low Profile)
| BUCKET SIZE | PUNCHING | WEIGHT, LBS. | CAPACITY, CU. IN. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bucket Size | Length | Projection | Depth | Back Wall Thickness |
Centers | # of Holes |
Bolt Size |
Top Down |
HDPE | Water Level |
Usable 5 Deg. |
Std Spacing |
|||
| in. | mm | in. | mm | in. | mm | ||||||||||
| 5 x 4 | 5-5/8 | 143 | 4-5/8 | 118 | 3-1/2 | 89 | 0.32 | 3-3/16 | 2 | 1/4 | 1 | 0.41 | 38 | 40 | 3-1/2 |
| 6 x 4 | 6-5/8 | 168 | 4-5/8 | 118 | 3-1/2 | 89 | 0.32 | 4-3/8 | 2 | 1/4 | 1 | 0.48 | 46 | 48 | 3-1/2 |
| 7 x 4 | 7-5/8 | 194 | 4-5/8 | 118 | 3-1/2 | 89 | 0.32 | 2-5/8 | 3 | 1/4 | 1 | 0.54 | 52 | 55 | 3-1/2 |
| 6 x 5 | 6-3/4 | 172 | 5-3/4 | 146 | 4 | 102 | 0.35 | 4-3/8 | 2 | 1/4 | 1 | 0.69 | 72 | 76 | 4 |
| 7 x 5 | 7-3/4 | 197 | 5-3/4 | 146 | 4 | 102 | 0.35 | 2-5/8 | 3 | 1/4 | 1 | 0.75 | 85 | 89 | 4 |
| 8 x 5 | 8-3/4 | 222 | 5-3/4 | 146 | 4 | 102 | 0.35 | 3-1/16 | 3 | 1/4 | 1 | 0.82 | 103 | 108 | 4 |
| 9 x 5 | 9-3/4 | 248 | 5-3/4 | 146 | 4 | 102 | 0.35 | 3-1/2 | 3 | 1/4 | 1 | 0.90 | 110 | 116 | 4 |
| 8 x 6 | 8-11/16 | 221 | 6-7/8 | 175 | 4-7/8 | 124 | 0.36 | 3-1/16 | 3 | 1/4 | 1 | 1.26 | 140 | 147 | 5 |
| 9 x 6 | 9-11/16 | 246 | 6-7/8 | 175 | 4-7/8 | 124 | 0.36 | 3-1/2 | 3 | 1/4 | 1 | 1.37 | 158 | 166 | 5 |
| 10 x 6 | 10-11/16 | 271 | 6-7/8 | 175 | 4-7/8 | 124 | 0.36 | 4 | 3 | 1/4 | 1 | 1.45 | 176 | 185 | 5 |
| 11 x 6 | 11-11/16 | 297 | 6-7/8 | 175 | 4-7/8 | 124 | 0.36 | 3 | 4 | 1/4 | 1 | 1.61 | 194 | 204 | 5 |
| 12 x 6 | 12-11/16 | 322 | 6-7/8 | 175 | 4-7/8 | 124 | 0.36 | 3-3/8 | 4 | 1/4 | 1 | 1.72 | 212 | 223 | 5 |
| 13 x 6 | 13-11/16 | 348 | 6-7/8 | 175 | 4-7/8 | 124 | 0.36 | 3-5/8 | 4 | 1/4 | 1 | 1.82 | 230 | 242 | 5 |
| 10 x 7 | 10-15/16 | 278 | 7-15/16 | 202 | 6 | 152 | 0.38 | 4 | 3 | 5/16 | 1 | 2.17 | 246 | 258 | 6 |
| 11 x 7 | 11-15/16 | 303 | 7-15/16 | 202 | 6 | 152 | 0.38 | 3 | 4 | 5/16 | 1 | 2.29 | 272 | 286 | 6 |
| 12 x 7 | 12-15/16 | 329 | 7-15/16 | 202 | 6 | 152 | 0.38 | 3-3/8 | 4 | 5/16 | 1 | 2.50 | 296 | 311 | 6 |
| 13 x 7 | 13-15/16 | 354 | 7-15/16 | 202 | 6 | 152 | 0.38 | 3-5/8 | 4 | 5/16 | 1 | 2.63 | 320 | 336 | 6 |
| 14 x 7 | 14-15/16 | 379 | 7-15/16 | 202 | 6 | 152 | 0.38 | 3 | 5 | 5/16 | 1 | 2.76 | 345 | 362 | 6 |
| 16 x 7 | 16-15/16 | 430 | 7-15/16 | 202 | 6 | 152 | 0.38 | 3-1/2 | 5 | 5/16 | 1 | 3.06 | 400 | 420 | 6 |
| 12 x 8 | 13-1/8 | 333 | 8-15/16 | 227 | 6-3/4 | 171 | 0.40 | 3-3/8 | 4 | 5/16 | 1 | 3.41 | 395 | 415 | 7 |
| 14 x 8 | 15-1/8 | 384 | 8-15/16 | 227 | 6-3/4 | 171 | 0.40 | 3 | 5 | 5/16 | 1 | 3.81 | 470 | 494 | 7 |
| 16 x 8 | 16-1/8 | 435 | 8-15/16 | 227 | 6-3/4 | 171 | 0.40 | 3-1/2 | 5 | 5/16 | 1 | 4.23 | 550 | 578 | 7 |
| 18 x 8 | 19-1/8 | 486 | 8-15/16 | 227 | 6-3/4 | 171 | 0.40 | 3-1/8 | 6 | 5/16 | 1 | 4.64 | 615 | 646 | 7 |
(Recommended but not restricted to handling these specific products)
- Barley
- Brown Sugar
- Coffee
- Corn
- Feed
- Flour
- Grain
- Grass Seed
- Meat Scap
- Nuts
- Oats
- Pellets
- Rice
- Salt
- Soy Beans
- Sugar
- Sunflower Seeds
- Wheat
| Poly |
|---|
 |
| Application: Grains & Food Products Temperature |
| Range: -60F to +180F(210F intermittent) |
| FDA Approved Material: Yes |
| Comments: Economical, high density polyethylene. FDA approved material for handling food grade products. |
Venting an elevator bucket aids in bucket fill and discharge with light, fluffy materials.
Lightweight, fluffy materials, those that are extremely dense or flow poorly can be difficult to handle in bucket elevators at high speeds. Because these materials tend to trap air when being handled by an elevator bucket, venting provides air relief to assist in their filling and discharge. Commodities for venting include flours, meals, feed mash, DDG’s or screenings. As these materials enter the bucket, air is released through a series of vent holes in the bottom of the bucket allowing for a more complete fill. These vent holes also allow air to re-enter the bucket, which facilitates full release of product into the discharge.
Standard hole diameter is equal to the size of the bolt mounting holes in vent pattern #1, all other vent patterns will have 11/32” diameter holes unless otherwise requested by the customer.
ADDITIONAL SPECIAL DRILLING AND VENTING CHARGES
- Drilling any diameter hole over 13/32″
- Bolt Hole centers closer than 1-3/4″
- Side drilled buckets except standard peanut buckets
- Special Venting requirements such as extra holes, change in hole diameter, etc.
- Quoted prices subject to change due to special drilling and venting requirements
| #1 Vent | #2 Vent | #3 Vent | #4 Vent | Custom Vent |
|---|---|---|---|---|
 |
 |
 |
 |
 |
| Same holes in body as bolt mounting holes. | One row of holes on 1-1/8″centers | Two rows of holes on 1-1/8″centers. | Same as #3, plus three holes in each end cap. | Vented as required. |
